BIS ACE 4.7 AMS 3.0 AMS 3.0.1
Activating/deactivating changing of AMC IP settings via IAccesIPConfig Tool


AMC Firmware and Bootloader Update

# Bootloader 
	- Bootloader Version LCMV0049
		*	Go to MAC/bin folder folder and find the file LCMV0049.RUN
		*	Rename LCMV0049.RUN to LCMV0049.ORG
		*	Copy the patched LCMV0049.RUN to MAC/Bin folder
	
# Firmware	
	Firmware files
	-	LCMV3760.run (Wiegand)
	-	LCMV6045.run (LBUS)
	-	LCMV6245.run (OSDP)
		*	Select the firmware files used in you enviroment
		* 	Go to MAC/bin folder folder and find the file LCMVXXXX.RUN
		* 	Rename LCMVXXXX.RUN to LCMVXXXX.ORG
		*	Copy the patched LCMVXXXX.RUN to MAC/Bin folder
		* 	Run coldstart on all AMC
	
	
	
AMC Change IP Adress with AccessIPConfig


Normally this so called 'Provisioning Mode' is deactivated.
*	This means that changing IP settings via IpConfig Tool is normally disabled.*
*	For activating this feature you need to select the AMC network name display
*	in the LCD. 
*	Then press and hold the LCD key while showing the AMC network name.
*	After 5 seconds the LCD display changes to "Start provision"
*	Also, the 'N' before the network name changes to 'P' as long as provisioning
*	mode is active
*	Now you can change the IP settings via IPConfig tool.
*	The feature will be disabled automatically after
*	- 24 hrs -or-
*	- after the settings have been changed successfully -or-
*	- after pressing the LCD button (while displaying the AMC network name)
*	  for 5 SEC again.