==================================== September 27, 2002 ==================================== Fabric OS V2.6.0f Patch Release Notes This Patch Release Notes contain description of a Defect fix for release v2.6.0a - 2.6.0f. Please refer to v2.6.0 Release Notes for all changes. =================================== DefectS FIXED IN FABRIC OS 2.6.0a =================================== Defect ID: 9750 Priority: 1 Problem Area: Software/Security Found in Release: v2.6.0 Problem Decription: Watchdog reboot of switch when additional ISL's added to the switch. Defect ID: 9948 Priority: 1 Problem Area: Software/Security Found in Release: v2.6.0 Problem Decription: Modified Name Server behavior to reduce I/O stoppage during the secFailOver operation. =================================== DefectS FIXED IN FABRIC OS 2.6.0b =================================== Bug ID: 10960 Priority: 1 Problem Area: Quickloop Found in Release: v2.6.0 Problem Area: quickloop is changing ALPA assignment Description of Fix: The command qlUnmaskLipa [ 0 | 1 ] has been added to this patch release. There are two modes of loop initialization, differentiated by setting the parameter to 0 or 1. When set to 0, initializing a looplet is off. When set to 1, initializing a looplet is on. When the parameter is set to initializing a looplet (1), QuickLoop masks the Arbitrated Loop Physical Address (AL_PA) bits in the Loop Initialization Procedure (LIPA) frame using the LIPA bitmaps of those looplets that stay online. Setting the parameter to 1 disables the LIPA bitmap masking and opens AL_PAs for assignment to devices in the initialized looplet during the LIPA phase, thus allowing the device to claim the same AL_PA. =================================== DefectS FIXED IN FABRIC OS 2.6.0c =================================== Defect ID: 10960 Priority: 1 Problem Area: Quickloop Found in Release: v2.6.0 Problem Area: quickloop is changing ALPA assignment Description of Fix: The command qlUnmaskLipa [ 0 | 1 ] has been added to this patch release. There are two modes of loop initialization, differentiated by setting the parameter to 0 or 1. When set to 0, initializing a looplet is off. When set to 1, initializing a looplet is on. When the parameter is set to initializing a looplet (1), QuickLoop masks the Arbitrated Loop Physical Address (AL_PA) bits in the Loop Initialization Procedure (LIPA) frame using the LIPA bitmaps of those looplets that stay online. Setting the parameter to 1 disables the LIPA bitmap masking and opens AL_PAs for assignment to devices in the initialized looplet during the LIPA phase, thus allowing the device to claim the same AL_PA. Defect ID: 11637 Priority: 1 Problem Area: Name Server Found in Release: v2.6.0 Problem Area: NS was requiring another probing to be completed before sending RSCN. Description of Fix: If probing has failed with NOT_SUPPORTED as the reason code, probing will discontinue and the NS will send an RSCN once the device has been registered. Defect ID: 10613 Priority: 2 Problem Area:Operating System Found in Release: v2.6.0 Problem Area: "Defect CRITICAL FCIU-IUBAD, 1, invalid iu 0x10de1760" error occurs when connected to a HP hba (A5158A) and if PortDisable/Enable is performed. Description of Fix: During PLOGI retry for reject, check to make sure the probing value does not exceed the max value for reject retry. If it does, fail the FCP probing and clean up the IU. =================================== DefectS FIXED IN FABRIC OS 2.6.0d =================================== Defect ID: 9605 Priority: 2 Found in Release: v2.6.0 Problem Area: nsshow does not display symbolic name for storage only empty brackets are displayed Description of Fix: The symbolic name for the storage device is now populated correctly between the brackets in the nsShow output. Defect ID: 11360 Priority:2 Found in Release: v2.6.0a Problem Area: Failure to re-establish ISL after long haul link reset because switch rejects the ELP. Description of Fix: ISL can now be re-established after a long haul link reset. Defect ID: 11763 Priority: 2 Found in Release: v2.6.0a Problem area: Admin applet fails to load after apostrophe character included in certain SNMP variables. Description of Fix: Admin applet now loads apostrophe character correctly for SNMP variables containing apostrophes. Defect ID: 12650 Priority: 2 Found in Release: 2.6.0a Problem area: tThad disable configure option is only available to root user Description of Fix: tThad disable configuration option is now available under Admin. Defect ID: 12651 Priority 1 Found in Release: 2.6.0a Problem Area: "FLOGI is discarded and should be rejected with "Command not supported" when Quickloop is enabled. Description for Fix: FLOGI is rejected with message "command not supported" instead of being discarded. Defect ID: 12652 Priority 3 Found in Release: 2.5.0d Problem Area: Erroneous high value SNMP portPerf traps received from Fabric Watch. Description of Fix: Port performance counter did not wrap correctly so the value displayed was incorrect. portPerf traps now display the correct value. Defect ID: 12653 Priority 1 Found in Release: 2.5.0d Problem Area: Interop with McData GA_NXT times out on ISL when sent from McData to Brocade switch. Description of Fix: NS CAM in 2.6.x allows adjacent switches to respond to GA_NXT request. Defect ID: 12654 Priority 2 Found in Release: Prolbem Area: Hyphen in the switch name in DNS disables access to zone admin and Name server windows in Web tools' Description of Fix: Hypen in switch name in DNS now can be displayed in zone admin and name server windows. Defect ID: 12688 Priority 2 Found in Release: Problem Area: Switch is not discarding invalid frames at destination at hardware speed. Description of Fix: Created function so invalid frames can be dropped at hardware speed. =================================== DefectS FIXED IN FABRIC OS 2.6.0e =================================== Defect ID: 12439 Priority High Found in Release: 2.5.1a Problem Area: GPSN_ID command, when sent to the remote switch suspends traffic on the ISL until it has completed. Description of Fix: Redirect the remote request processing to a specific receive task. Defect ID: 12594 Priority: 3 Found in Release: v2.5.1b Problem Area: Cfgclear removes zoning configuration without warning. Description of Fix: Added warning that cfgclear removes zoning config in the entire fabric and asks user to confirm before execution. Defect ID: 14681 Priority: Critical Found in Release: v2.5.1b Problem Area: Broadcast storm on Ethernet network causes switch to stop responding. Description of Fix: Detects broadcast storm and shuts down Ethernet port. Defect ID: 12916 Priority: High Found in Release: Problem Area: Taking a Symm offline causes portfault errors Description of Fix: Port is not hard faulted on link initialization failures. Defect ID: 14016 Priority: 1 Found in Release: v2.5.1b Problem Area: Zoning window in Webtools takes long time to load with very large configurations. Description of Fix: Loading large configurations does not take long time with the fix. =================================== DefectS FIXED IN FABRIC OS 2.6.0f =================================== Defect ID: 14020 Priority:High Found in Release: 2.6.0d Problem Area: "Cfgtransshow" Command Fails To Show Outstanding Zoning Transactions. Shows The Effective Zone Configuration instead. Description of Fix: cfgtransshow was removed from the help menu to prevent misuse. Defect ID: 11931 Priority:Medium Found in Release:2.6.0c Problem Description: Telnet session from AIX host to 2109-S16/S08 switch with FOS 2.6.0c v2.6.0x does not echo the commands that are being typed. Commands are only visible after hitting the enter key and output of command is displayed correctly Description of Fix: Commands are now visible as they are being typed. Defect ID: 15040 Priority:High Found in Release: 2.6.0 Problem Description: No data capture to troubleshoot watchdog reboots of switch. Description of Fix: Instrumentation added to capture task activity on the switch at time of reboot and setTaskLogMode can be run by admin to capture further watchdog data.