Members


Item	Description
Circuit Name	Name of the VCAT circuit member.
Type	Displays the VCAT circuit member type, either the specific high-order path or the low-order path circuit type.
Size	Displays the VCAT circuit member size. Member size for VC4-V circuits is VC4 or VC4-4c.
OCHNC Wlen	Does not apply to VCAT circuit members.
Dir	Displays the VCAT circuit member direction. The only valid entry is 2-way (bidirectional).
OCHNC Dir	Does not apply to VCAT circuit members.
Protection	Displays the type of circuit protection. For VCAT circuits, "unprot" (unprotected) is the circuit protection type.
Status	Displays the VCAT circuit member status. See the Circuit Statuses table for circuit status descriptions.
Source	Displays the circuit source in the format: node/slot/port "port name" virtual container/tributary unit group. (The port name appears in quotes.) Node and slot always display; port "port name"/virtual container/tributary unit group might display, depending on the source card, circuit type, and whether a name is assigned to the port. If the circuit size is a concatenated size (VC4-2c, VC4-4c, VC4-8c, etc.) VCs used in the circuit are indicated by an ellipsis, for example, VC4-7..9 (VCs 7, 8, and 9) or VC4-10..12 (VC 10, 11, and 12).
Destination	Displays the VCAT circuit member destination in the same format (node/slot/port "port name"/member) as the member source.
# of VLANs	Does not apply to VCAT circuit members.
# of Spans	Displays the number of nonnode links that constitute the VCAT circuit member.
VCAT State	Displays the member state: In Group or Out of Group. An In Group member has cross-connects in the IS-NR; OOS-MA,AINS; or OOS-MA,MT service states. An Out of Group member has cross-connects in the OOS-MA,DSBLD or OOS-MA,OOG service states.
Show Detailed Map	If checked, changes the circuit view in the graphic area to show circuit routing information including source slot, port, and VC. The detailed view also shows working and protect circuit paths.
Show VC LO Topology	If checked, displays any low-order path tunnels that carry the low-order path circuit. If the circuit is not carried by a low-order path tunnel, no changes appear when the box is checked.
Show WDM Topology	If checked, hides the TXP and MXP connections on which high-order and low-order circuits are routed, showing only the logical STM-N links. This check box is available only when circuits are routed on TXP or MXP cards provisioned in section or line mode.
Edit Member	Displays the Edit Circuits dialog box for the selected member.
Add Member	Displays the Add Members dialog box.
Delete Member	Removes the selected member.
Apply	Applies any edits made to the Members tab.
Reset	Removes any edits made to the Members tab.
Help	Displays CTC context-sensitive help.