Line

Use the Line subtab to provision the line parameters for the E3-12 card.

Port

(Display only.) The card port number.

Port Name

The name of the electrical port.

Admin State

Administrative states are used to manage service states:

Note: A change in the administrative state of an entity does not change the service state of supporting or supported entities.

  • unlocked: Puts the entity in-service.

  • locked,disabled: Removes the entity from service and disables it.

  • locked,maintenance: Removes the entity from service for maintenance.

  • unlocked,automaticInservice: Puts the entity in automatic in-service.

  • locked,outOfGroup: (VCAT circuits only.) Removes a VCAT member cross-connect from service and from the group of members.

Service State

Indicates the card port service state. Service states appear in the format: Administrative_State-Operational_State, Status_Attribute. For additional state information, see States.

SF BER

Sets the signal failure bit error rate.

SD BER

Sets the signal degrade bit error rate.

AINS Soak

Automatic in-service soak. The amount of time left before the traffic/termination transitions to IS state.

Apply

Applies changes made to the fields in the tab.

Reset

Cancels any changes to the tab and returns the fields to their last-saved settings.

Help

Displays context-sensitive help.