Type
|
Description
|
User Data - F1
|
Creates a UDC circuit on the F1 overhead byte. A UDC circuit allows you to create a dedicated data channel between ONS nodes.
|
User Data - D4-D12
|
Creates a UDC circuit on the MS-DCC (D4 to D12) overhead bytes.
|
Local Orderwire
|
Creates a local orderwire overhead circuit. Local orderwire circuits require an AIC or AIC-I card at the source and destination nodes. You cannot create local orderwire circuits if regenerators are used between ONS nodes.
|
Express Orderwire
|
Creates an express orderwire overhead circuit. Express orderwire circuits require an AIC-I card at the source and destination nodes.
|
DCC Tunnel - D1-D3
|
Creates a DCC tunnel on the SDH RS-DCC (D1 to D3) overhead bytes.
|
DCC Tunnel - D4-D12
|
Creates a DCC tunnel on the SDH MS-DCC (D4 to D12) overhead bytes.
|
IP Tunnel - D1-D3
|
Creates an IP tunnel on the D1 to D3 RS-DCC overhead bytes. The IP tunnel takes RS-DCC traffic from non-ONS equipment, encapsulates the traffic into the TCP/IP UDP and sends it across the ONS network to the other ONS node.
|