Line

Use the Line subtab to provision the line parameters.

Port

(Display only.) The card port number.

Port Name

The name of the electrical port.

SF BER

Sets the signal failure bit error rate.

SD BER

Sets the signal degrade bit error rate.

Line Type

Defines the line framing type: E1_MF, E1_CRCMF, or E1_Unframed.

Line Coding

Defines the transmission coding type: HDB3

Admin State

Administrative states are used to manage service states:

Note: A change in the administrative state of an entity does not change the service state of supporting or supported entities.

  • unlocked: Puts the entity in-service.

  • locked,disabled: Removes the entity from service and disables it.

  • locked,maintenance: Removes the entity from service for maintenance.

  • unlocked,automaticInService: Puts the entity in automatic in-service.

  • locked,outOfGroup: (Virtual concatenated [VCAT] circuits only.) Removes a VCAT member cross-connect from service and from the group of members.

Service State

Indicates the card port service state. Service states appear in the format: Administrative_State-Operational_State, Status_Attribute. For additional state information, see States.

AINS Soak

Automatic in-service soak. The amount of time left before the traffic/termination transitions to IS state.

Apply

Applies changes made to the fields in the tab.

Reset

Cancels any changes to the tab and returns the fields to their last-saved settings.

Help

Displays context-sensitive help.