Circuit Destination
Use the Circuit Destination page to provision the circuit destination. Provisionable parameters include Node, Slot, Port, STS, VT, and DS1. The Node field appears for all circuit types. Slot, Port, specific STS, VT, and DS1 might appear, depending on the ONS node, circuit type, circuit size, the protection scheme, and the node and slot that are chosen. If a card, port, STS, or VT capacity is fully utilized, it does not appear in the menu.
For STS, STS-V, VT, and VT-V circuits, a secondary destination check box appears so you can create a secondary destination, for example, a UPSR bridge/selector circuit destination point in a multivendor UPSR.
The following table describes the Circuit Destination page fields and buttons.
Item
|
Description
|
Node
|
Sets the circuit destination node.
|
Slot
|
Sets the slot used by the circuit. The card installed in the slot determines the availability of the Port, STS, VT, and DS1 fields.
|
Port
|
Sets the port used by the circuit. The Port field only appears if the slot chosen contains a multiport card. If 802.17 RPR mode is enabled, the port drop-down list has RPR East or RPR West.
|
STS
|
Sets the STS used by the circuit.
|
VT
|
Sets the VT used by VT circuits.
|
DS1
|
Sets the DS-1 used by VT circuits.
|
Use Secondary Destination
|
(STS, STS-V, VT, and VT-V circuits only) If checked, displays Node, Slot, Port, STS, and VT fields so you can define a secondary circuit destination.
|
OCHNC Lines
|
Displays the aggregation ports (In and Out) facing the line through which the circuit will be routed.
|
Back
|
Displays the previous Circuits Creation wizard page. The page that appears depends on the circuit type.
|
Next
|
Displays the next Circuit Destination page.
|
Cancel
|
Cancels circuit creation.
|
Help
|
Displays context-sensitive help.
|