Loopback

Use the Loopback subtab to retrieve loopback information for TXP and MXP cards.

Port

Displays the port number.

Admin State

Sets the port administration state. Choosing an administrative state from the drop-down list and clicking Apply changes the port's service state unless network conditions prevent the change. Admin states include:

  • IS-Puts the port in service. The port service state changes to IS-NR.

  • IS,AINS-Puts the port in automatic in-service. The port service state changes to OOS-AU,AINS.

  • OOS,DSBLD-Removes the port from service and disables it. The port service state changes to OOS-MA,DSBLD.

  • OOS,MT-Removes the port from service for maintenance. The port service state changes to OOS-MA,MT.

Service State

Shows the autonomously generated state that gives the overall condition of the port. Service states appear in the format: Primary State-Primary State Qualifier, Secondary State. For additional state information, see States.

Loopback Type

Configures a port for a terminal or facility loopback (Inward) or clears the current loopback (none) on both client and trunk.

Apply

Applies changes made to the fields in the tab.

Reset

Cancels any changes to the tab and returns the fields to their last-saved settings.

Help

Displays context-sensitive help.