Port
|
Displays the port number.
|
CV
|
Sets the threshold for the number of coding violations. Coding violations are BIP errors that are detected in the incoming signal. A threshold is associated with this parameter, and the table cell will be flagged in red when it exceeds the threshold. You can set thresholds using the CLI.
|
ES
|
Sets the threshold for the number of errored seconds. An errored second is a one-second period with one or more coding violations at that layer or one or more incoming defects at that layer.
|
SES
|
Sets the threshold for the number of severely errored seconds. A severely errored second is a one-second period with x or more coding violations at that layer or one or more incoming defects at that layer. The value of x depends on the line rate and bit error rate.
|
FC
|
Sets the threshold for the failure count.
|
UAS
|
Sets the threshold for the number of unavailable seconds.
|
Directions
|
Select Near End or Far End for the PM direction.
|
Intervals
|
Select 15 Min or 1 Day for the PM interval.
|
Types
|
Select Line, Section, or Path, where applicable.
|
Refresh
|
Refreshes the thresholds display.
|
Apply
|
Applies changes made to the fields in the tab.
|
Reset
|
Cancels any changes to the tab and returns the fields to their last-saved settings.
|
Help
|
Displays context-sensitive help.
|