Near End
|
Select Near End to display the near-end thresholds.
|
Far End
|
Select Far End to display the far-end thresholds.
|
15 Min
|
Select to enter threshold information for a generation of 15-minute TCAs.
|
1 Day
|
Select to enter threshold information for a generation of 1-day TCAs.
|
DS3 Pbit
|
Select to display DS3 PBit threshold information.
|
DS3 CPBit
|
Select to display DS3 CPBit threshold information.
|
Show Thresholds
|
Shows selected thresholds.
|
Port
|
Displays the port number.
|
CV
|
Sets the threshold for the number of coding violations. Coding violations are BIP errors that are detected in the incoming signal. A threshold is associated with this parameter, and the table cell will be flagged in red when it exceeds the threshold. You can set thresholds using the command-line interface (CLI).
|
ES
|
Sets the threshold for the number of errored seconds. An errored second is a one-second period with one or more coding violations at that layer or one or more incoming defects at that layer.
|
SES
|
Sets the threshold for the number of severely errored seconds. A severely errored second is a one-second period with x or more coding violations at that layer or one or more incoming defects at that layer. The value of x depends on the line rate and BER.
|
LOSS
|
Sets the threshold for the number of one-second intervals containing one or more LOS defects.
|
CVP
|
Sets the threshold for the coding violations.
|
ESP
|
Sets the threshold for the errored seconds.
|
SAS
|
Sets the threshold for the severely errored frame/alarm indication signal for the path.
|
AISS
|
Sets the threshold for the alarm indication signal seconds.
|
UAS
|
Sets the threshold for the unavailable seconds.
|
Apply
|
Applies changes made to the fields in the tab.
|
Reset
|
Cancels any changes to the tab and returns the fields to their last-saved settings.
|
Help
|
Displays context-sensitive help.
|