Near End
|
Select to correct the DS3XM-6 or DS3XM-12 near-end thresholds.
|
Far End
|
Select to correct the DS3XM-6 or DS3XM-12 far-end thresholds.
|
15 Min
|
Select to enter electrical path threshold information for a generation of 15-minute TCAs.
|
1 Day
|
Select to enter electrical path threshold information for a generation of 1-day TCAs.
|
DS3 Pbit
|
Select to display the DS3 PBit thresholds.
|
DS3 CPBit
|
Select to display the DS3 CPBit thresholds.
|
DS1
|
Select to display thresholds for the corresponding DS1 within each port.
|
Show Thresholds
|
Shows selected thresholds.
|
Port
|
Displays the port number.
|
CV
|
Sets the threshold for the number of coding violations. Coding violations are BIP errors that are detected in the incoming signal. A threshold is associated with this parameter, and the table cell will be flagged in red when it exceeds the threshold. You can set thresholds using the CTC.
|
ES
|
Sets the threshold for the number of errored seconds. An errored second is a one-second period with one or more coding violations at that layer or one or more incoming defects at that layer.
|
SES
|
Sets the threshold for the number of severely errored seconds. A severely errored second is a one-second period with x or more coding violations at that layer or one or more incoming defects at that layer. The value of x depends on the line rate and BER.
|
SAS
|
Sets the threshold for the severely errored frame/alarm indication signal.
|
AISS
|
Sets the threshold for the alarm indication signal seconds.
|
UAS
|
Sets the threshold for the unavailable seconds.
|
ESNE
|
(Far End) Sets the threshold for the near-end errored seconds from the far-end node.
|
ESFE
|
(Far End) Sets the threshold for the far-end errored seconds from the far-end node.
|
SESNE
|
(Far End) Sets the threshold for the near-end severely errored seconds from the far-end node.
|
SESFE
|
(Far End) Sets the threshold for the far-end severely errored seconds from the far-end node.
|
UASNE
|
(Far End) Sets the threshold for the near-end unavailable seconds from the far-end node.
|
UASFE
|
(Far End) Sets the threshold for the far-end unavailable seconds from the far-end node.
|
Apply
|
Applies changes made to the fields in the tab.
|
Reset
|
Cancels any changes to the tab and returns the fields to their last-saved settings.
|
Help
|
Displays context-sensitive help.
|