Port
|
Displays the card port number.
|
Port Name
|
Displays the port name. This is the only field that you can provision for the ML-Series card from CTC.
|
Admin State
|
Displays the active or inactive configured administrative port state. Possible values are UP and DOWN.
|
Link State
|
Displays the physical port state. Possible values are UP and DOWN.
|
MTU
|
Displays the maximum transfer unit, which is the largest acceptable packet size configured for that port. The maximum setting is 9000 and the default size is 1500. The MTU value of 0 until the packet-over-SONET (POS) port is used in creating a circuit.
|
Speed
|
(ML100T-12 and ML100X-8 only) Displays the speed. Possible values are Auto, 10 Mbps, and 100 Mbps.
|
Duplex
|
(ML100T-12 and ML100X-8 only) Displays the setting of the port. Possible values are Auto, Full, and Half.
|
Flow Control
|
Displays the negotiated flow control mode. Possible values are None, Symmetrical, and Asymmetrical.
|
Optics
|
(ML1000-2 and ML100X-8 only) Displays the SFP physical media type. Possible values are Unplugged, 1000 SX, and 1000 LX.
|
Apply
|
Applies changes made to the port name.
|
Reset
|
Cancels any changes to the port name and returns it to its last-saved settings.
|
Help
|
Displays context-sensitive help.
|