Inventory

---

Use the Inventory tab to view a complete list of equipment installed on the Cisco ONS node.

Item	Description
Location	Identifies where the equipment is installed, either the chassis or slot number.
Eqpt Type	Displays the type of equipment but not the specific card name, for example, OC-12 or DS-1.
Admin State	Changes the service state of the card unless network conditions prevent the change. For more information about administrative states, refer to the ONS node product documentation. IS-Puts the card in the In-Service and Normal (IS-NR) service state. OOS,MA-Puts the card in the Out-of-Service and Autonomous, Maintenance (OOS-AU,MT) service state.
Service State	Displays the current card service state, which is an autonomously generated state that gives the overall condition of the card. Service states appear in the format: Primary State-Primary State Qualifier, Secondary State. For additional state information, see States.
Actual Eqpt Type	Displays the actual equipment type, for example, OC12 IR/STM4 SH 1310.
HW Part #	Displays the hardware part number; this number is printed on the top of the card or equipment piece.
HW Rev	Displays the hardware revision number.
Serial #	Displays the equipment serial number; this number is unique to each card.
CLEI Code	Displays the Common Language Equipment Identifier (CLEI) code.
Firmware Rev	Displays the card's boot code revision number.
Bootrom Rev	Displays the boot read-only memory (ROM) revision number.
Product ID	Displays the product identification number.
Version ID	Displays the version identification number.
Delete Card	Deletes the card highlighted in the Inventory table from node view.
Reset Card	Resets the card highlighted in the Inventory table.
Apply	Applies the changes to the service state.
Reset	Returns the original values.
Help	Displays context-sensitive help.