Near End
|
Select Near End to display the near-end thresholds.
|
Far End
|
Select Far End to display the far-end thresholds.
|
15 Min
|
Select to enter threshold information for generation of 15-minute TCAs.
|
1 Day
|
Select to enter threshold information for generation of 1-day TCAs.
|
Show Thresholds
|
Shows thresholds for the selected parameters.
|
Port
|
Displays the port number.
|
CV
|
(Near End and Far End) Sets the threshold for the number of coding violations. Coding violations are BIP errors that are detected in the incoming signal. A threshold is associated with this parameter, and the table cell is flagged in red when it exceeds the threshold. You can set thresholds using the CTC.
|
ES
|
(Near End and Far End) Sets the threshold for the number of errored seconds. An errored second is a one-second period with one or more coding violations at that layer or one or more incoming defects at that layer.
|
SES
|
(Near End and Far End) Sets the threshold for the number of severely errored seconds. A severely errored second is a one-second period with x or more coding violations at that layer and one or more incoming defects at that layer. The value of x depends on the line rate and bit error rate.
|
SASP
|
(Near End only) Sets the threshold for the severely errored frame/alarm indication signal thresholds for the path.
|
FC
|
(Far End only) Sets the threshold for the failure count.
|
AISSP
|
(Near End only) Sets the threshold for the alarm indication signal seconds for the path.
|
UAS
|
(Near End and Far End) Sets the threshold for the unavailable seconds.
|
CSS
|
(Far End only) Sets the threshold for the count of seconds during which a controlled slip has occurred. Counts of controlled slips can be accurately made only in the path terminating NE of the DS-1 signal where the controlled slip takes place.
|
ESA
|
(Far End only) Sets the threshold for Errored Seconds-A, which is a count of 1-second intervals with exactly one CRC-6 error and no AIS or severely errored frame (SEF).
|
ESB
|
(Far End only) Sets the threshold for Errored Seconds-B, which is a count of 1-second intervals with exactly one CRC-6 error and no AIS or SEF.
|
SEFS
|
(Far End only) Sets the threshold for the severely errored framing seconds, which is a count of 1-second performance report message (PRM) intervals containing an SE=1.
|
Apply
|
Applies changes made to the fields in the tab.
|
Reset
|
Cancels any changes to the tab and returns the fields to their last-saved settings.
|
Help
|
Displays context-sensitive help.
|