Port
|
Displays the port number.
|
ALS Mode
|
Allows you to provision the automatic laser shutdown:
Disable: ALS is off; the laser is not automatically shut down when traffic
outages (loss of signal [LOS]) occur.
Auto Restart: ALS is on; the laser automatically shuts down when traffic
outages (LOS) occur. It automatically restarts when the conditions that caused
the outage are resolved.
Manual Restart: ALS is on; the laser automatically shuts down when traffic
outages (LOS) occur. However, the laser must be manually restarted when
conditions that caused the outage are resolved.
Manual Restart for Test: Manually restarts the laser for testing.
|
Recovery Pulse Duration
|
Sets the recovery laser pulse duration, in seconds, for the initial, recovery optical power pulse following a laser shutdown.
|
Recovery Pulse Interval
|
Sets the recovery laser pulse interval, in seconds. This is the period of time that must past before the recover pulse is repeated.
|
Currently Shutdown
|
Indicates whether the laser is currently shut down, either On or Off.
|
Request Laser Restart
|
Allows you to restart the laser. If ALS Mode is set to Manual Restart or Manual Restart for Test, the check box is available after a laser shutdown.
Note: Restarting a laser might be traffic-affecting.
|
Apply
|
Applies changes made to the fields in the tab.
|
Reset
|
Cancels any changes to the tab and returns the fields to their last-saved settings.
|
Help
|
Displays context-sensitive help.
|