Call Home Communications Test

You can test Call Home communications by sending a test message to the configured destination(s) or sending a test inventory message to the configured destination(s).

Detailed Steps

To test the Call Home function and simulate a message generation, follow these steps:

  1. Select a switch in the Fabric pane.
  2. Expand Events and select Call Home in the Physical Attributes pane.

    3. You see the Call Home information in the Information pane.

  3. Click the Test tab.

    4. You see the configured tests for the switch and the status of the last testing.

  4. Select a switch in the Information pane.
  5. From the TestAction drop-down list in the row for that switch, select test or testWithInventory
  6. Click the Apply Changes icon to run the test.

Table 4-9 includes all the traps for EMC Call Home.

Table 4-9 EMC Call Home Traps

SNMP Trap

Send EMC Call Home When

connUnitStatusChange

operStatus == failed(5)

cefcModuleStatusChange

operStatus != {ok(2), boot(5), selfTest(6), poweredUp(16), syncInProgress(21)}

cefcPowerStatusChange

operStatus = {offDenied(4), offEnvPower(5),offEnvTemp(6),offEnvFan(7),failed(8)}

cefcFRURemoved

all

cefcFanTrayStatusChange

all

cieDelayedLinkUpDown

operStatusReason != {linkFailure, adminDown, portGracefulShutdown}

cefcFRUInserted

all

entSensorThresholdNotification

value >= threshold


Copyright 2010-2013, Cisco Systems, Inc. All rights reserved.