Ethernet Interfaces

The Description and Admin fields in the table can be modified. The remaining fields are for information only.

Field

Description

Switch

Name of the switch hosting this interface.

Interface

Interface name.

Description

Text description of the interface as specified by a network manager.

VIG Id

Virtual interface group to which this virtual interface is bound.

Bound Eth Interface

Physical Ethernet interface associated with this virtual Ethernet interface.

Admin

The desired state of the interface.

Oper

The current operational state of the interface.

LastChange

When the interface entered its current operational state. If the current state was entered prior to the last re-initialization of the local network management subsystem, then this value is N/A.

CDP (Enable)

Indicates whether the Cisco Discovery Protocol is currently running on this interface.

Duplex Status

The current mode of operation of the MAC entity. The status 'unknown' indicates that the current duplex mode could not be determined.

Enable Link Trap

Specifies whether Link Up or Link Down traps should be generated for this interface.

Note     This table applies only to N5k switches running version less than 4.0(1a).



Copyright 2010-2013, Cisco Systems, Inc. All rights reserved.