|
Field
|
Description
|
|
Alignment Errors
|
The count of frames received on a particular interface that are an
integral number of octets in length but do not pass the FCS check.
|
|
FCS Errors
|
The count of frames received on a particular interface that are an
integral number of octets in length but do not pass the FCS check.
This count does not include frames received with frame-too-long or
frame-too-short error.
|
|
Single Collision Frames
|
The count of successfully transmitted frames on a particular interface
for which transmission is inhibited by a single collision.
|
|
Multiple Collision Frames
|
The count of successfully transmitted frames on a particular interface
for which transmission is inhibited by more than one collisions.
|
|
SQE Test Errors
|
The number of times the PLS sublayer generated the SQE TEST
ERROR message for a particular interface.
|
|
Deferred Transmissions
|
The count of the number of frames for which the first transmission
attempt on a particular interface is delayed because the medium is
busy.
|
|
Late Collisions
|
The number of times that a collision is detected on a particular
interface later than one slot time into the transmission of a packet.
|
|
Excessive Collisions
|
The count of the number of frames for which transmission on a
particular interface failes because of excessive collisions. This
counter does not increment when the interface is operating in
full-duplex mode.
|
|
Internal Mac Transmit Errors
|
The count of the number of frames for which transmission on a
particular interface fails because of an internal MAC sublayer
transmit error.
|
|
Carrier Sense Errors
|
The number of times that a carrier sense condition was lost or never
asserted when attempting to transmit a frame on a particular
interface.
|
|
Frame Too Longs
|
The count of number of frames received on a particular interface that
exceed the maximum permitted frame size.
|
|
Internal Mac Receive Errors
|
The count of number of frames for which reception on a particular
interface fails because of an internal MAC sublayer receive error.
|
|
Symbol Errors
|
For an interface operating at 100 Mb/s, the number of times there was
an invalid data symbol when a valid carrier was present
|