Configuring DPVM with the DPVM Wizard

Detailed Steps

To use the DPVM Setup Wizard to set up dynamic port VSAN membership, follow these steps:

  1. Click the DPVM Setup Wizard icon in the DCNM-SAN toolbar .

    2. You see the Select Master Switch page.

  2. Click the switch you want to be the master switch. This switch controls the distribution of the DPVM database to other switches in the fabric.
  3. Click Next.

    4. You see the AutoLearn Current End Devices page.

  4. (Optional) Click the Create Configuration From Currently Logged In End Devices check box if you want to turn on autolearning.
  5. Click Next.

    6. You see the Edit and Activate Configuration page.

  6. Verify the current or autolearned configuration. Optionally, click Insert to add more entries into the DPVM config database.
  7. Click Finish to update the DPVM config database, distribute the changes using CFS, and activate the database, or click Cancel to exit the DPVM Setup Wizard without saving changes.
  8. Select the switch you want to be the master switch. This switch controls the distribution of the DPVM database to other switches in the fabric.
  9. Click Next.

    10. You see the AutoLearn Current End Devices page.

  10. (Optional) Check the Create Configuration From Currently Logged In End Devices check box if you want to enable autolearning.
  11. Click Next.

    12. You see the Edit and Activate Configuration page.

  12. Verify the current or autolearned configuration. Optionally, click Insert to add more entries into the DPVM config database.
  13. Click Finish to update the DPVM config database, distribute the changes using CFS, and activate the database, or click Cancel to exit the DPVM Setup Wizard without saving changes.

Copyright 2010-2013, Cisco Systems, Inc. All rights reserved.