Manually Enabling FICON on a VSAN

Note     This section describes the procedure to manually enable FICON on a VSAN. If you have already enabled FICON on the required VSAN using the automated setup (recommended), skip to the "Automatically Saving the Running Configuration" topic.

Detailed Steps

To manually enable FICON on a VSAN, follow these steps:

  1. Choose VSAN > FICON.

    2. You see the FICON VSAN configuration information in the Information pane.

  2. Select the switch in the VSAN on which you want to enable FICON.
  3. Click enable from the Command drop-down menu.
  4. Click the Apply Changes icon to save these changes.

Copyright 2010-2013, Cisco Systems, Inc. All rights reserved.