Configuring FICON Ports
You can perform FICON configurations on a per-port address basis in the Cisco MDS 9000 Family switches.
Even if a port is uninstalled, the port address-based configuration is accepted by the Cisco MDS switch. This configuration is applied to the port when the port becomes installed.
This section includes the following topics:
- Binding Port Numbers to PortChannels
- Binding Port Numbers to FCIP Interfaces
- Configuring Port Blocking
- Assigning a Port Address Name
- Specifying an RLIR Preferred Host
- Applying the Saved Configuration Files to the Running Configuration
- Editing FICON Configuration Files
- Copying FICON Configuration Files
- Swapping Ports
- Configuring FICON Tape Acceleration
- Configuring FICON Tape Read Acceleration
- Configuring XRC Acceleration
- Placing CUPs in a Zone
- Calculating FICON Flow Load Balance
- Receiving FICON Alerts
Copyright 2010-2013, Cisco Systems, Inc. All rights reserved.