Changing the IP Address of the Cisco DCNM-SAN Server

DETAILED STEPS

  1. Stop the Cisco DCNM-SAN Server.
  2. Change the following parameter in the $INSTALLDIR/conf/FMServer.conf.

    3. wrapper.app.parameter.4=127.0.0.1

  3. Change the following parameter in the $INSTALLDIR/conf/server.properties.

    4. server.bindaddrs = 127.0.0.1

  4. Enter the following command to assign a new IP address. 
    5. run $INSTALLDIR/bin/PLMapping.bat -p newipaddress 0

    Assume $INSTALLDIR is the top directory of DCNM-SAN installation. The above command is for single server instance, where 0 is the server ID.


Copyright 2010-2013, Cisco Systems, Inc. All rights reserved.