Configuring Fibre Channel Routes

Detailed Steps

If you disable FSPF, you can manually configure a Fibre Channel route.

To configure a Fibre Channel route using Device Manager, follow these steps:

  1. Click FC > Advanced > Routes.

    2. You see the FC Static Route Configuration dialog box.

  2. Click Create to create a static route.

    3. You see the Create Route dialog box.

  3. Select the VSAN ID that you are configuring this route.
  4. Fill in the destination address and destination mask for the device you are configuring a route.
  5. Select the interface that you want to use to reach this destination.
  6. Select the next hop domain ID and route metric.
  7. Select either the local or remote radio button.
  8. Click Create to save these changes or click Close to discard any unsaved changes.

Copyright 2010-2013, Cisco Systems, Inc. All rights reserved.