Disabling Restrictions on Oversubscription Ratios

Prerequisites

• Before disabling restrictions on oversubscription ratios, ensure that you have explicitly shut down shared ports.
• This feature is only supported on 48-port and 24-port 4-Gbps, and 8-Gbps Fibre Channel switching modules.

Detailed Steps

To disable restrictions on oversubscription ratios on multiple 48-port or 24-port 4-Gbps, or any 8-Gbps Fibre Channel switching modules using DCNM-SAN, follow these steps:

1. Choose Switches > Hardware.
2. Click the Module Config tab. You see the Module Config dialog box.
3. From the RateModeOversubscriptionLimit drop-down list, select disabled for each module for which you want to disable restrictions on oversubscription ratios.
4. Click Apply to save the changes.

To disable restrictions on oversubscription ratios on a single 48-port or 24-port 4-Gbps, or any 8-Gbps Fibre Channel switching module using Device Manager, follow these steps:

1. Right-click a module and select Configure.

You see the Module dialog box.

2. Click the disabled radio button to disable restrictions on oversubscription ratios.
3. Click Apply to save the changes.

---

Copyright 2010-2013, Cisco Systems, Inc. All rights reserved.