Configuring Port Administrative Speeds

Restrictions

Detailed Steps

To configure the administrative speed of the interface using DCNM-SAN, follow these steps:

  1. Expand Switches > FC Interfaces > Physical.

    2. You see the interface configuration in the Information pane.

  2. Click the General tab.
  3. Click Speed Admin. Set the desired speed from the drop-down menu.

    4. The number indicates the speed in megabits per second (Mbps). You can set the speed to 1-Gbps, 2-Gbps, 4-Gbps, 8-Gbps, autoMax2G, autoMax4G, or auto (default).

    Note     On a Cisco Nexus 5000 Series switch that runs Cisco NX-OS Release 4.2(2), you can configure the 8-Gbps administrative speed only on a M1060 switch module. You can configure the speed to 1-Gbps, 2-Gbps, or 4-Gbps on all switch modules on a Cisco Nexus 5000 Series switch that runs Cisco NX-OS Release 4.2(2) or earlier releases.

  4. Click Apply Changes.

Copyright 2010-2013, Cisco Systems, Inc. All rights reserved.