Configuring Management Interfaces

Detailed Steps

To configure the management interface using DCNM-SAN, follow these steps:

  1. Select a VSAN in the Logical Domains pane.
  2. In the Physical Attributes pane, expand Switches > Management.

    3. You see the interface configuration in the Information pane.

  3. Click the IP Addresses tab and set the Interface, IP Address/Mask field.
  4. Click the General tab and set the Status Admin to up.
  5. (Optional) Set other configuration parameters using the other tabs.
  6. Click Apply Changes.

Copyright 2010-2013, Cisco Systems, Inc. All rights reserved.