Configuring IPS Core Dumps

Detailed Steps

To configure the Gigabit Ethernet interface, follow these steps:

  1. From Cisco DCNM-SAN, choose Switches > Interfaces > Gigabit Ethernet in the Physical Attributes pane. You see the Gigabit Ethernet configuration in the Information pane.

    2. From Device Manager, right-click the Gigabit Ethernet port that you want to configure and choose Configure.... You see the Gigabit Ethernet configuration dialog box.

  2. Click the General tab in Cisco DCNM-SAN, or click the GigE tab in Device Manager to display the general configuration options for the interface.
  3. Set the description and MTU value for the interface. The valid value for the MTU field can be a number in the range from 576 to 9000.
  4. Set Admin up or down and check the CDP check box if you want this interface to participate in CDP.
  5. Set IpAddress/Mask with the IP address and subnet mask for this interface.
  6. From Cisco DCNM-SAN, click the Apply Changes icon to save these changes, or click the Undo Changes icon to discard changes.

    7. From Device Manager, click Apply to save these changes, or click Close to discard changes and close the Gigabit Ethernet configuration dialog box.


Copyright 2010-2013, Cisco Systems, Inc. All rights reserved.