Configuring Gigabit Ethernet Interface

Detailed Steps

To configure the Gigabit Ethernet interface, follow these steps:

  1. Expand Switches > Interfaces > Ethernet > IPS.

    2. You see the Gigabit Ethernet Configuration in the Information pane.

  2. Click the IP Addresses tab.
  3. Click Create Row.

    4. You see the Create Gigabit Ethernet Interface dialog box.

  4. Select the switch on which you want to create the Gigabit Ethernet interface.
  5. Enter the interface. For example, 2/2 for slot 2, port 2.
  6. Enter the IPv4 address (10.1.1.100) and subnet mask (255.255.255.0).
  7. Click Create to save these changes or click Close to discard any unsaved changes.

Copyright 2010-2013, Cisco Systems, Inc. All rights reserved.