Configuring IPv6 Addressing and Enabling IPv6 Routing

Detailed Steps

To configure an IPv6 address on an interface using Device Manager, follow these steps:

  1. Choose Interfaces > Gigabit Ethernet and iSCSI.

    2. You see the Gigabit Ethernet Configuration dialog box.

  2. Click the IP Address that you want to configure and click Edit IP Address.

    3. You see the IP Address dialog box.

  3. Click Create and set the IP Address/Mask field, using the IPv6 format (for example, 2001:0DB8:800:200C::417A/64).
  4. Click Create to save these changes or click Close to discard any unsaved changes.

To enable IPv6 routing using Device Manager, follow these steps:

  1. Choose IP > Routing. You see the IP Routing Configuration dialog box.
  2. Check the Routing Enabled check box.
  3. Click Apply to save these changes or click Close to discard any unsaved changes.

Copyright 2010-2013, Cisco Systems, Inc. All rights reserved.