Enabling the F Port Trunking and Channeling Protocol
This section describes how to enable the F port trunking and channeling protocol.
Prerequisites
- To avoid inconsistent configurations, shut all ports before enabling or disabling the trunking
protocols.
- The trunking protocols must be enabled to support trunking, and NPIV must be enabled on the core
switch to activate a TF-TNP link.To enable NPIV, use the feature npiv command.
Detailed Steps
To enable or disable the F port trunking and channeling protocols using DCNM-SAN, follow these steps:
- From the Physical Attributes panel, expand Switches. Select FC Services, and then select
F_Port_Channel/Trunk.
You see the list of switches in the Fabric with F port trunking and channeling enabled.
- From the command column, select enable or disable or no selection.
Copyright 2010-2013, Cisco Systems, Inc. All rights reserved.