Activating a Zone Set

Changes to a zone set do not take effect in a full zone set until you activate it.

Detailed Steps

To activate an existing zone set, follow these steps:

  1. Choose Zone > Edit Local Full Zone Database.

    2. You see the Select VSAN dialog box.

  2. Select a VSAN and click OK.

    3. You see the Edit Local Full Zone Database dialog box for the selected VSAN.

  3. Click Activate to activate the zone set.

    4. You see the pre-activation check dialog box.

  4. Click Yes to review the differences.

    5. You see the Local vs. Active Differences dialog box.

  5. Click Close to close the dialog box.

    6. You see the Save Configuration dialog box.

  6. Check the Save Running to Startup Configuration check box to save all changes to the startup configuration.
  7. Click Continue Activation to activate the zone set, or click Cancel to close the dialog box and discard any unsaved changes.

    8. You see the Zone Log dialog box, which shows if the zone set activation was successful.


Copyright 2010-2013, Cisco Systems, Inc. All rights reserved.