4.1.2 CSP GUI Demo

Note:

The GUI version of the CSP demo is supported on Windows for SpringWare boards only.

To run the GUI version of the CSP demo, follow these instructions:

1. Open a command prompt window and go to the directory where the demo is located.
2. At the command prompt, type

cspgui 

Alternatively, you can run the GUI version of the CSP demo using these instructions:

1. Open Windows Explorer and go to the directory where the demo is located.
2. Double-click on the cspgui.exe filename.

After you have invoked the CSP GUI demo, the screen similar to the one shown in Figure4-1, CSP Demo Initial Screen -- GUI Version is displayed.

Figure 4-1. CSP Demo Initial Screen -- GUI Version

For more information on the Input Parameters on the screen, see Table4-1, CSP Demo Options. The field names on the screen correspond to these options in the table, where N represents an integer:

• -cN = Number of Channels
• -sN = Starting Voice Channel
• -nN = Network Channel
• -iN = Iteration Number
• -hN = Speech Threshold Value
• -a, -e, -t = Front-end Board Type
• -l = Enable Logging
• -w = Enable Wait for Ring/Wink

Click here to contact Dialogic Customer Engineering