2.1 Hardware Requirements

To run the CSP demo, you need at a minimum:

• One CSP-enabled board configured as the first board in the system.

If you run the CSP demo in manual mode (single-channel demo that uses the first channel of the board), you also need one of the following:

• For boards with a digital network interface, a T-1 or an E-1 line connected to your system.
• For boards with an analog interface, an analog line such as a connection to a PBX.

For other system configuration requirements, such as memory requirements, see the Release Guide for this system release.

Click here to contact Dialogic Customer Engineering