3.1. IPLink Boards

The IPLink boards are organized according to boards that share a common set of CONFIG files and include the following groups of boards:

• DM/IP241-1T1-PCI
• DM/IP241-1T1-cPCI, DM/IP2431A-1T1-PCI
• DM/IP301-1E1-PCI
• DM/IP301-1E1-cPCI, DM/IP3031A-1E1-PCI
• DM/IP0821A-T1
• DM/IP0821A-E1-120
• DM/IP241-1T1-PCI-100BT
• DM/IP301-1E1-PCI-100BT
• DM/IP481-2T1-PCI-100BT
• DM/IP481-2T1-cPCI-100BT
• DM/IP601-2E1-PCI-100BT
• DM/IP601-2E1-cPCI-100BT

The IPLink configuration files' naming convention is as follows:

xxxx _yyy_r_#zzzzK_ml#_tttc
xxxx	ipt = embedded call control (NetTSC)ipvs = split call control (IPVS)
yyy	evr = exportable voice resources (flexible routing )
r	If present, an "r" indicates a resource only load (no dti support)
#	If present, indicates the number of PSTN interfaces. If missing, then assume that it supports 1 PSTN interface.
zzzz	PSTN protocol
K	If present, a "k" indicates that the PSTN interface is disabled
ml#	If present, indicates a specific media load supported.
ttt	If present, indicateds the type of DSP: 307 or 311. If missing, then assume 303.
c	If present, a "c" indicates that this is for a cPCI productIf missing, indicates a PCI product.

Click here to contact Telecom Support Resources