 |
 |
 |
 |
 |
|
|
|
|
|
1.1. Configuration File Sets
Except for the SCD (Linux only) and CDP files, the configuration files associated with a specific configuration have the same name; only the extensions (.pcd, .fcd and .config) differ. A set of these files with the same name are used for a specific DM3 board type. The board type can include a single board or a group of similar boards. Depending on the board type and the protocol that the board will use, a specific FCD and PCD file are downloaded to that board. In addition, if the FCD file needs to be modified, the CONFIG file in that same set is updated and used to generate a new FCD file. Configuration file sets are located in the \Dialogic\Data directory.
For example, if you were using the robbed bit protocol on a DM/V960A-4T1-PCI board, then you might use the configuration file set that included:
For a detailed list of boards and supported configuration file sets, see Chapter 3, Boards and Applicable CONFIG File Sections.
|
|
|
|
|
Click here to contact Telecom Support Resources
Copyright 2003, Intel Corporation