4.16.13. ANICount (ANI Digit Count)

Description: The ANICount parameter defines the number of ANI digits to collect from the incoming call. If the parameter is set to 0, then digit collection will stop after the timeout period set by the PreDigitTimeout and InterDigitTimeout parameters defined in the [CHP] Variant Define n section of the CONFIG file. For details see:

• Section 1.3.10, [CHP] Section.
• Section 4.16.18, InterDigitTimeout (Inter-digit Timeout).
• Section 4.16.17, PreDigitTimeout (Pre-digit Timeout).

Values:

• 0 = Collect all the digits provided
• n = Number of digits to collect

Click here to contact Telecom Support Resources