4.19.2. LineId (Line Identifier)

Description: The LineId parameter defines the T-1 or E-1 line that carries all of the B channels in the set.

For example, on a T-1 QuadSpan board with four network interfaces, the value of LineId is set to 1 for line 1, 2 for line 2, and so on for each line as follows:

defineBSet=10,1,1,23, 0,1,1,1,20,1, 1,1,3,23,0
defineBSet=20,2,1,23, 0,1,1,1,20,1, 1,1,3,23,0
defineBSet=30,3,1,23, 0,1,1,1,20,1, 1,1,3,23,0
defineBSet=40,4,1,23, 0,1,1,1,20,1, 1,1,3,23,0 

Values: 1 to 4

Click here to contact Telecom Support Resources