4.19.10. Width (Width)

Description: The Width parameter specifies the number of time slots used by each B channel. Currently, only one time slot per channel is used.

Note: This Width should not be modified by the user.

For example, on a T-1 line, Width is set to a value of 1 as follows:

defineBSet=10,1,1,23, 0,1,1,1,20,1, 1,1,3,23,0
defineBSet=20,2,1,23, 0,1,1,1,20,1, 1,1,3,23,0
defineBSet=30,3,1,23, 0,1,1,1,20,1, 1,1,3,23,0
defineBSet=40,4,1,23, 0,1,1,1,20,1, 1,1,3,23,0 

Values: 1

Click here to contact Telecom Support Resources