4.20.32. PrmT38ECOverride (ECM Override)

Parameter Number: 0x1b3c

Description: The PrmT38ECOverride parameter allows you to override the Error Correction Mode (ECM) for all calls. If the PrmT38ECOverride parameter is enabled, then the gateway will limit the negotiated fax session to only non-ECM calls. This parameter enables the receiving fax device to request missing or erroneous scan lines.

Values:

• 0 = Disable (Do not override the ECM)
• 1 = Enable (Override the ECM)

Click here to contact Telecom Support Resources