4.9.4. Wink (E&M Wink Signal)

Parameter Number: 0xC15CA011

Description: The Wink parameter defines a pulse signal for the purposes of protocol hand-shaking and is typically used as an acknowledgment signal to the line carrier or PBX. It is most often used to acknowledge signaling bit changes detected from the carrier or to signal the start or end of digit collection. The signal transitions from OffVal to OnVal and back to OffVal. For detailed information about pulse signals and their associated values, see Pulse Signal and Pulse Example.

Values:

• OffVal = 0xF0 (11110000)
• OnVal = 0xFF (11111111)
• PreTm = 100 ms
• MinTm = 210 ms
• NomTm = 250 ms
• MaxTm = 280 ms
• PostTm = 100 ms

Click here to contact Telecom Support Resources