4.9.5. Flash (E&M Flash Signal)

Parameter Number: 0xC15CA012

Description: The Flash parameter defines a pulse signal for the purposes of requesting special processing. This signal is typically sent to transfer a call to another phone or channel while the call is connected and in progress. The signal goes from OffVal to OnVal and back to OffVal. For detailed information about pulse signals and their associated values, see Pulse Signal and Pulse Example.

Values:

• OffVal = 0xFF (11111111)
• OnVal = 0xF0 (11110000)
• PreTm = 100 ms
• MinTm = 210 ms
• NomTm = 250 ms
• MaxTm = 280 ms
• PostTm = 100 ms

Click here to contact Telecom Support Resources