4.10.2. PBX_Close (Loop Start PBX Close Signal)

Parameter Number: 0xC15CA022

Description: The PBX_Close parameter defines the transition signal sent to make an outbound call, or to answer an incoming call. In an analog environment, the station goes from on-hook to off-hook. For detailed information about transition signals and their associated values, see Transition Signal and Transition Example.

Values:

• PreVal = 0xF5 (11110101)
• PostVal = 0xFF (11111111)
• PreTm = 100 ms
• PostTm = 100 ms

Click here to contact Telecom Support Resources