4.16.1. ProtocolType (Protocol Type)

Description: The ProtocolType parameter defines the type of T-1 protocol used on a channel.

Note: The ProtocolType parameter is also used when defining ISDN protocol variants.

Values:

• 1 = E&M wink
• 2 = Loop start-FXS
• 3 = Ground start-FXS
• 4 = Loop start-FXO (This value is not supported.)
• 5 = Ground start-FXO (Supported by HDSI and Dialogic Integrated Series boards only.)

Click here to contact Telecom Support Resources