1.1. Summary of Test Utilities

1.1. Summary of Test Utilities

Table 1 lists all the DM3 diagnostic utilities, briefly describes each one, and specifies the operating system(s) on which each can be used. Detailed information on each utility is given in Chapter 3, "DM3 Diagnostic Utility Descriptions".

Table 1. List of DM3 Utilities
Utility Description Operating System

Alarms Monitors the alarms on a T-1 or E-1 line. Windows, Linux

Audio Control Controls the Player resource and Recorder resource. Windows, Linux

CallInfo Detects call information via the TSP resource and lets you specify the call-related events you want to trace. Windows, Linux

CAS Signal Editor Allows you to dynamically view and modify CAS signal identification parameters (transitions, pulses, trains, or sequences) so you can test them before changing the .config file. Windows, Linux

DebugView Lets you monitor debug output on your local system, or any computer on the network that you can reach via TCP/IP. Windows

Digit Detector Demonstrates the use of the Tone Generator and Signal Detector components. Windows, Linux

DM3Insight Traces and decodes Message and Stream traffic between host and DM3 boards. Windows

Dm3KDebug Prints out useful DM3 kernel information. Windows, Linux

Dm3post Performs POST diagnostics on demand. Windows, Linux

Dm3StdErr Polls the board and posts the qPrintf( ) statements from the resources and DM3 Kernel. Windows, Linux

Dm3Trace Prints out qTrace statements based on the qTraceLevel( ) DM3 Kernel function. Windows, Linux

Getver Retrieves the version string of a DM3 binary file. Windows, Linux

ISDN Trace Provides the ability to track Layer 3 (Q.931) messages on the ISDN D-channel. Windows, Linux

KernelVersion Queries the DM3 Kernel for its version number. Windows, Linux

LineAdmin Puts lines into service so you can run many of the other diagnostic utilities. Also monitors the alarms on a T-1 or E-1 line. Windows, Linux

Listboards Displays status information for baseboard and daughterboards (if any). Windows, Linux

MercMon Displays Class Driver and Protocol Driver counter information. Windows

PDK Configuration Utility Used when integrating E-1 R2MF protocol information (CDP files) into IPLink, Fax or HDSI FCD files. Windows, Linux

PDKManager Utility Used to download and configure E-1 R2MF protocol information on QuadSpan or DualSpan boards. Windows, Linux

Phone Provides DM3 GlobalCall Resource call control. Windows, Linux

QError Returns the string associated with kernel error codes. Windows, Linux

STD Config Configures DM3 component parameters. Windows, Linux

StrmStat Displays the status of specified stream(s). Windows

TSP Config Changes protocol variant parameters (ISDN and T1 CAS) dynamically. Windows, Linux

TSP Monitor Monitors the DM3 GlobalCall Resource protocol. Windows, Linux

TSP Tracer Traces CAS protocol operations and includes timing information. Windows, Linux

**Table 1. List of DM3 Utilities**
Utility	Description	Operating System
Alarms	Monitors the alarms on a T-1 or E-1 line.	Windows, Linux
Audio Control	Controls the Player resource and Recorder resource.	Windows, Linux
CallInfo	Detects call information via the TSP resource and lets you specify the call-related events you want to trace.	Windows, Linux
CAS Signal Editor	Allows you to dynamically view and modify CAS signal identification parameters (transitions, pulses, trains, or sequences) so you can test them before changing the .config file.	Windows, Linux
DebugView	Lets you monitor debug output on your local system, or any computer on the network that you can reach via TCP/IP.	Windows
Digit Detector	Demonstrates the use of the Tone Generator and Signal Detector components.	Windows, Linux
DM3Insight	Traces and decodes Message and Stream traffic between host and DM3 boards.	Windows
Dm3KDebug	Prints out useful DM3 kernel information.	Windows, Linux
Dm3post	Performs POST diagnostics on demand.	Windows, Linux
Dm3StdErr	Polls the board and posts the qPrintf( ) statements from the resources and DM3 Kernel.	Windows, Linux
Dm3Trace	Prints out qTrace statements based on the qTraceLevel( ) DM3 Kernel function.	Windows, Linux
Getver	Retrieves the version string of a DM3 binary file.	Windows, Linux
ISDN Trace	Provides the ability to track Layer 3 (Q.931) messages on the ISDN D-channel.	Windows, Linux
KernelVersion	Queries the DM3 Kernel for its version number.	Windows, Linux
LineAdmin	Puts lines into service so you can run many of the other diagnostic utilities. Also monitors the alarms on a T-1 or E-1 line.	Windows, Linux
Listboards	Displays status information for baseboard and daughterboards (if any).	Windows, Linux
MercMon	Displays Class Driver and Protocol Driver counter information.	Windows
PDK Configuration Utility	Used when integrating E-1 R2MF protocol information (CDP files) into IPLink, Fax or HDSI FCD files.	Windows, Linux
PDKManager Utility	Used to download and configure E-1 R2MF protocol information on QuadSpan or DualSpan boards.	Windows, Linux
Phone	Provides DM3 GlobalCall Resource call control.	Windows, Linux
QError	Returns the string associated with kernel error codes.	Windows, Linux
STD Config	Configures DM3 component parameters.	Windows, Linux
StrmStat	Displays the status of specified stream(s).	Windows
TSP Config	Changes protocol variant parameters (ISDN and T1 CAS) dynamically.	Windows, Linux
TSP Monitor	Monitors the DM3 GlobalCall Resource protocol.	Windows, Linux
TSP Tracer	Traces CAS protocol operations and includes timing information.	Windows, Linux

Click here to contact Dialogic Customer Engineering