3.24. TSP Config

3.24. TSP Config

TSP Config sets and retrieves DM3 protocol variant parameters. Using this utility the user can change protocol variant parameters dynamically from one call to the next.

This tool can be used on any DM3 product that has a T1 CAS or T1/E1 ISDN TSP resource. The tool does not work for R2MF protocols or Analog protocols.

Operating Systems: Windows, Linux

Command Line: tspconfig [parameter_list]

The TSP Config utility uses the following command line parameters:

Parameter Description

-board <n> Board number (required). Use the Listboards utility to obtain the board number.

-id <n> Protocol variant id (1 - 32), whose parameters you are configuring dynamically. For example, tspconfig -board 0 -id 2, will display the parameters of protocol variant id 2.

Example: This example runs the TSP Config utility on board 0:
 tspconfig -board 1
Display: Figure 27 shows the TSP Config display.

Figure 27. TSP Config Display

Parameter	Description
-board <n>	Board number (required). Use the Listboards utility to obtain the board number.
-id <n>	Protocol variant id (1 - 32), whose parameters you are configuring dynamically. For example, tspconfig -board 0 -id 2, will display the parameters of protocol variant id 2.

Click here to contact Dialogic Customer Engineering