3.25. TSP Monitor

TSP Monitor performs the following:

• Monitors one or two DM3 GlobalCall resource channels.
• Traces all levels of the protocol including:
  • DM3 GlobalCall resource call control operations from clients
  • DM3 GlobalCall resource call state changes
  • DM3 GlobalCall resource channel state changes
  • CAS signaling bits
• Launches an audio tool for recording/playback purposes on the channel(s). It plays audio data (a file from the host) using the TSP.
• Checks timing via point and click on GUI (Figure 28)
• Tunes protocols and identifies configuration problems

Operating Systems: Windows, Linux

Command Line: tspmon [parameter_list]

The TSP Monitor utility uses the following command line parameters:

Parameter	Description
-board <n>	Board number (required). Use the Listboards utility to obtain the board number.
-line <n>	Line number (optional, default is 1)
-chan <n>	Channel number (optional, default is 1)

Example: This example runs the TSP Monitor utility on board 0, line 1, channel 1:

 tspmon -board 0 -line 1 -chan 1

Display: Figure 28 shows the TSP Monitor display.

Figure 28. TSP Monitor Display

Click here to contact Dialogic Customer Engineering