3.3.2. Guidelines

To use CallInfo, specify the call-related events you want to trace as follows:

1. Click the Action menu on the CallInfo display (Figure 3). Highlight Select Ids and select the group of call-related events you want to trace (CallInfoSet, IE Set or ISDNMsgSet).

Figure 3. CallInfo Action Menu

2. A window of events specific to the event group you selected (CallInfoSet, IE Set or ISDNMsgSet) will appear. Figure 4 shows the window that will appear if you choose ISDNMsgSet. Select the events you want to trace by clicking on them.

Figure 4. ISDNMsgSet Event Selection

3. After you select events, click the Action menu and choose DetectEvt. The utility will start tracing the events you selected. Figure 5 shows CallInfo tracing sample events. As new call information comes in, it will write over the old call information on the CallInfo display. A separate console window will open that tracks messages coming in and shows the message sequence.

Figure 5. CallInfo Tracing Sample Events

4. If you want to stop tracing the events you selected and select other events to trace, click the Action menu and select CancelEvt. Then follow steps 1 through 3 again.
5. To exit the CallInfo tool completely, select Action > Exit or close the window.

Click here to contact Dialogic Customer Engineering