2.10.  Run Time Configuration of the PDKRT Call Control Library

NOTE:

The information in this section is applicable to Springware boards only. DM3 boards do not use PDKRT analog protocols. On DM3, the analog protocol is embedded in the firmware.

Table 5.  Configurable PDKRT Call Control Library Parameters shows the parameters of the PDKRT call control library that can be configured using the real time configuration management (RTCM) functions. The gc_GetConfigData( ) function can be used to retrieve the target object configuration, and the gc_SetConfigData( ) function can be used to update the target object configuration.

NOTE:

Since these parameters are statically defined, the gc_QueryConfigData( ) function is not applicable.

Table 5.  Configurable PDKRT Call Control Library Parameters

Set ID	Parm ID	Target Object Type	Description	Data Type	Access Attribute*
GCSET_ CALLINFO	CONNECT_ TYPE	GCTGT_CCLIB_ CRN	Connect type (alternative to gc_GetCallInfo( ))	char	GC_R_O
*Note: GC_R_O - retrieve only

Click here to contact Telecom Support Resources