Global Call E-1/T-1 CAS/R2 Technology User's Guide: Table of Contents
1. How to Use This Guide
1.1. Organization of this Guide
1.2. Intel® Dialogic® Products That Support E-1/T-1 Signaling
1.3. Related Information
2. Signaling Concepts
2.1. Making Telephone Calls: Transmission of Digits and Signaling Information
2.1.1. Making Long Distance and Global Telephone Calls
2.2. T-1 Robbed Bit Signaling Concepts
2.3. E-1 CAS Signaling Concepts
2.4. R2 MF Signaling Concepts
2.4.1. R2 MF Multifrequency Combinations
2.4.2. R2 MF Signal Meanings
2.4.3. R2 MF Compelled Signaling
2.5. Direct Dialing In (DDI) Service
3. Developing Global Call E-1 CAS or T-1 Robbed Bit Applications
3.1. Global Tone Detection (GTD) Tone Considerations
3.2. Call Progress and Call Analysis
3.2.1. Call Analysis with DM3 Boards
3.2.2. Call Analysis with Springware Boards
3.2.3. Call Analysis Functionality for PDK Protocols
3.2.4. Call Analysis Functionality for ICAPI Protocols
3.3. Header Files
3.4. Resource Association
3.5. Alarm Handling
3.5.1. Alarm Handling for DM3 boards
3.5.2. Alarm Handling for Springware Boards
3.6. Run Time Configuration of the PDKRT Call Control Library
3.7. Run Time Configuration of PDK Protocol Parameters
3.8. Determining the Protocol Version
4. Applying Global Call Functions to E-1 CAS or T-1 Robbed Bit Applications
4.1. gc_AcceptCall( )
4.2. gc_AnswerCall( )
4.3. gc_BlindTransfer( )
4.4. gc_CallAck( )
4.5. gc_Close( )
4.6. gc_CompleteTransfer( )
4.7. gc_Detach( )
4.8. gc_DropCall( )
4.9. gc_Extension( )
4.10. gc_GetCallInfo( )
4.11. gc_GetParm( )
4.12. gc_HoldCall( )
4.13. gc_MakeCall( )
4.13.1. PDK_MAKECALL_BLK
4.13.2. IC_MAKECALL_BLK
4.14. gc_OpenEx( )
4.14.1. Conventions for Specifying the devicename Parameter
4.14.2. Examples of the devicename Parameter
4.14.3. Other gc_OpenEx( ) Considerations
4.15. gc_ResetLineDev( )
4.16. gc_RetrieveCall( )
4.17. gc_SetBilling( )
4.18. gc_SetChanState( )
4.19. gc_SetEvtMsk( )
4.20. gc_SetParm( )
4.21. gc_SetUpTransfer( )
4.22. gc_Start( ) and gc_Stop( )
4.23. gc_StartTrace( )
4.24. gc_SwapHold( )
5. Resource Allocation and Routing
5.1. Dedicated Voice Resources
5.1.1. Dedicated Voice Resources Example
5.2. Shared Voice Resources
5.2.1. Shared Voice Resources Example
6. Protocols
6.1. Protocols Supported
6.2. Protocol File Naming Conventions
6.3. Protocol Components
6.3.1. Protocol Modules
6.3.2. Country Dependent Parameter (.cdp) Files
6.3.3. Parameter (.prm) Files (Springware only)
7. Debugging Applications
7.1. Debugging Applications that Use PDK Protocols
7.1.1. Enabling and Disabling the Logging
7.1.2. Populating and Using a CCLIB_START_STRUCT
7.1.3. Defining the GC_PDK_START_LOG Environment Variable
7.2. Debugging Applications that Use ICAPI Protocols
Copyright notice
Copyright 2003, Intel Corporation
All rights reserved
This page generated February, 2003