Configuration File for Dual-Resilient SIU and a Single Host: Configuration for SIU B
* DSC231 Protocol Configuration File (config.txt)
* Refer to the DSC131/DSC231 User Manual.
*
* Dual-Resilient SIU configuration with 1 Host
* One PCCS6 in each SIU. One link interconnects both SIUs.
* On the host, 2 circuit groups terminate on Dialogic DTI boards
* Under normal condition (both SIU ok), group "dtiB1" is managed by SIU A
* and group "dtiB2" is managed by SIU B.
* This file is for SIU B.
*
*
* SIU commands :
* Set the SIU instance. Set to SIUA for standalone, SIUA or SIUB for dual operation.
* SIU_INSTANCE <instance_token> = SIUA | SIUB
*
SIU_INSTANCE SIUB
*
* Define the network address of this SIU :
* SIU_ADDR <network_address>
*
SIU_ADDR 146.152.183.188
*
* Define the network address of the partner SIU (dual operation only) :
* SIU_REM_ADDR <remote_address>
*
SIU_REM_ADDR 146.152.183.246
*
* Define the number of hosts that this SIU will connect to :
* SIU_HOSTS <num_hosts>
*
SIU_HOSTS 1
*
* Set physical Interface Parameters :
* PCCS6_BOARD <port_id> <bpos> <num_pcm> <flags>
* PCCS3_BOARD <port_id> <bpos> <num_pcm> <flags>
*
PCCS6_BOARD 0 4 0 0x0007
*
* MTP Parameters :
* MTP_CONFIG <local_spc> <ssf> <options>
*
MTP_CONFIG 2 0x8 0x0001
*
* Define linksets :
* MTP_LINKSET <linkset_id> <adjacent_spc> <num_links> <flags> <local_spc> <ssf>
*
MTP_LINKSET 0 1 1 0x0000 2 0x8
* Inter-siu linkset:
MTP_LINKSET 1 2 1 0x8000 2 0x8
*
* Define signalling links :
* MTP_LINK <link_id> <linkset_id> <link_ref> <slc> <bpos> <blink> <stream> <timeslot> <flags>
*
MTP_LINK 0 0 0 1 4 0 0x10 0x10 0x0006
* [link inter-siu]
MTP_LINK 1 1 0 0 4 1 0x11 0x10 0x0006
*
* Define a route for each remote signalling point :
* MTP_ROUTE <dpc> <linkset_id> <user_part_mask>
*
MTP_ROUTE 1 0 0x0020
*
* ISUP Parameters :
* ISUP_CONFIG <local_pc> <ssf> <user_id> <options> <num_grps> <num_ccts>
*
ISUP_CONFIG 2 0x8 0x4d 0x0474 8 96
*
* Define ISUP circuit (groups) :
* [device_name <SIUA|SIUB>]
* ISUP_CFG_CCTGRP <gid> <dpc> <base_cic> <base_cid> <cic_mask> <options> <host_id>
*
* [dtiB1 SIUA]
ISUP_CFG_CCTGRP 0 1 0x01 0x01 0x7fff7fff 0x0002 0x00
* [dtiB2 SIUB]
ISUP_CFG_CCTGRP 1 1 0x21 0x21 0x7fff7fff 0x0002 0x00
*
* Cross Connections :
* These commands control the connection of voice channels through
* the SIU.
*
STREAM_XCON 4 16 17 3 0xfffefffe 0x00
*
*
* End of file
*
